Product Features: 1. The JKA5.0 controller is specifically designed for use with disc filter systems. 2. It has an embedded PID diagram, a simple operating interface, clear parameter settings, and does not require the operator to master complex programming languages. 3. In special cases, it can also be manually forced to start regeneration. 4. The controller has an alarm function that emits an alarm switch signal when the equipment malfunctions or cannot be cleaned thoroughly, making it easy to monitor the filter's working status. 5. It has a built-in pressure sensor with high accuracy and reliability, eliminating the need for an external pressure differential switch. 6. It adopts a split design, with the control circuit and stager having a flip-open design for high safety performance. 7. It supports PPI communication and can communicate with upper computers. 8. It has an IP65 waterproof rating. Controller Installation: 1. A 230V, 50HZ or 110VAC 60HZ power source is required near the controller. 2. The controller needs to be installed on a bracket or control cabinet. 3. The controller bracket needs to be firmly welded and protected against vibration. 4. A space of 200mm needs to be left on either side of the controller for maintenance purposes. 5. A space of no less than 500mm needs to be left under the stager control box for hose installation purposes. 6. The maximum ambient humidity is 75%RH, with no water droplets forming, and the ambient temperature should be between 32℉ (0℃) and 140℉ (60℃). 7. The controller box has an external size of 300x230x160, while the stager box has an external size of 160x160x120.